Deep Tech19 Nov 20262 min read

Graphene Oxide Coating Fixes Copper 3D Printing Hurdles

Researchers at Chalmers University coated copper powder with graphene oxide, boosting laser absorption and enabling 3D-printed thin-wall metal parts.

Listen to this storyAbout 3 min, read by your device
Picture made with AI

GrapheneGrapheneGraphene is a single layer of carbon atoms arranged in a honeycomb lattice. Open in glossary is prized for its strength and its ability to conduct heat and electricity. However, using it in commercial manufacturing remains a challenge. Mixing graphene into other materials and spreading it evenly is difficult.

New research from Chalmers University of Technology shows a way forward. Doctoral researcher Plinio Fernandes Borges Silva studied how to add graphene-based materials to powder-based industrial methods. To solve the mixing problem, Silva developed a technique to coat individual metal powder particles with graphene oxideGraphene oxideAn oxidized form of graphene that contains oxygen groups and disperses easily. Open in glossary.

Solving the Copper Printing Problem

The coating method delivered promising results in laser powder bed fusionLaser powder bed fusionA 3D printing method that uses a laser to melt and fuse metal powder layer by layer. Open in glossary, a common type of metal additive manufacturingAdditive manufacturingA production method that builds objects layer by layer, commonly known as 3D printing. Open in glossary. In this process, lasers melt metal powder layer by layer to build an object.

Pure copper has always been hard to 3D print using lasers. The metal reflects most of the laser energy away instead of absorbing it. Adding a graphene oxide coating changed this behavior. The coated copper powder absorbed significantly more laser energy. The coating also altered how the metal behaved as it melted.

Cleaner Metal and Thinner Walls

The research revealed that the coating acted as a sacrificial layer during the melting stage. It reacted with copper oxides to pull out oxygen, leaving the finished components with much less oxygen inside.

These changes make the metal easier to handle in additive manufacturing. Under the study’s test conditions, pure copper could not form fine geometries. In contrast, the graphene-coated copper allowed the creation of thin-wall structures.

This capability could improve the production of complex components. For example, high-performance heat exchangers used in advanced cooling systems rely on thin metal walls to transfer heat quickly.

How does this story land?

One tap per reader.

Quick poll

Which industry will benefit most from 3D-printed copper parts?

One tap. No sign-up.

Ask this story

Still have a question?

Answers use only what is in this story. They are written by AI and can be wrong.

Sources

  1. Tech Xplore - electronic gadgets, technology advances and research news, Making graphene work in metal manufacturing
Up next in Deep TechInkjet method speeds chip-scale atomic clock production for critical infrastructure2 min read